Boards, rails and outdoor access · Melbourne

Deck Repairs Melbourne

Timber deck repairs, board replacement, stair and handrail work, sanding and restoration for Melbourne homes.

Restored timber deck and handrail at a Melbourne home

A deck can look tired on the surface while also hiding movement around boards, stairs, rails or the framing below. Mel One starts with the condition of the complete outdoor area, then separates surface restoration from the carpentry repairs that need to happen first.

Mel One replaces damaged or rotten deck boards and repairs timber steps and handrails. We also replace worn decking over an agreed area and prepare and recoat the whole deck, including sanding, staining or protective oiling to suit the timber and existing finish. The supporting structure is checked before boards are replaced; removal, replacement area and the coating system are set out in the quote.

What to expect

Repair the deck assembly before sanding or recoating it.

01

Check boards, steps, rails and support

We identify loose or split boards, soft ends, projecting fixings and movement at steps and rails. Visible supports and accessible framing are checked before the scope is reduced to a surface clean or oiling job.

02

Define the replacement area

Local boards may be replaced where surrounding timber and supports remain sound. Wider decay or unreliable support requires a broader scope. Board size, available timber, gaps, access and the difference between new and weathered boards are agreed before ordering.

03

Protect the site and remove failed material

We arrange access around doors, planting and the area below the deck, and identify any section that cannot remain in use. Failed boards are removed in the agreed area so supporting timber and fixing locations can be checked.

04

Repair and refix the assembly

Replacement boards, steps or rail components are fitted to the agreed scope and reliable support. Fixing position, board edges, gaps and connected stair or handrail movement are addressed before surface restoration proceeds.

05

Prepare the agreed area and apply its finish

Cleaning, removal of failed coating and sanding are selected for the timber and existing finish. A suitable deck oil, stain or coating is applied over the agreed area according to its conditions; primer is not assumed to belong under every penetrating deck oil.

06

Check edges, fixings and the finished scope

We check the repaired boards and connected components for the agreed fit and movement, then review the finished area and any appearance differences. Access after coating follows the selected product and site conditions rather than a promised universal number of hours.

Repair pricing

What shapes the quote?

A reliable quote starts with seeing the repair area. These are the factors we normally need to understand first.

  • 01Deck area and access
  • 02Number of boards affected
  • 03Condition below the boards
  • 04Stairs and handrails
  • 05Surface preparation and finish

See the details

Related carpentry work

Browse all projects

Frequently asked questions

Useful answers before you request a quote.

How much does deck repair cost in Melbourne?

Cost depends on deck size, access, the number of failed boards, the condition of the substructure and whether sanding or oiling is included. Photos are a useful first step, followed by a site check where needed.

Can only the rotten deck boards be replaced?

Yes, when the surrounding boards and support structure are sound. If deterioration continues below or across a wider area, a larger repair may be more durable.

Should the deck be repaired before it is oiled?

Yes. Loose, damaged or rotten components should be addressed before surface preparation and coating so the finish is applied to a sound deck.

Does a deck repair quote include sanding and oiling the whole surface?

Not automatically. Board replacement, other timber repairs, sanding and protective oiling are different parts of the scope. The quote should state the area covered by each item and whether the finish applies only to the repair or to the whole deck.

Will replacement boards look the same as the older decking?

An exact match cannot be promised. Timber species, board profile, existing weathering and the current coating all affect the result. The available material and finishing options should be checked against the existing deck before the appearance is agreed.

Can you replace some boards and recoat the whole deck?

Yes. We can combine local board replacement with preparation and recoating of the full agreed deck area. Repairs come first, then the suitable stain, oil or coating is agreed. Wider decking replacement is also available after the supporting structure and access have been checked.

Read all carpentry FAQs

Plan the repair and the property access together

Show the whole deck and visible damaged sections from a safe position. Identify whether your request concerns boards, steps, rails or the supporting timber. South-eastern and bayside Melbourne enquiries →

The team confirms the actual scope, location and visit arrangements before work is booked.

Discuss your project

Need deck repairs in Melbourne?

Share the suburb, what you have noticed and a few useful photos. Check our Melbourne service areas, then we will explain what we can assess from the details and what needs an on-site check.