Doors, jambs and frames · Melbourne

Door & Door Frame Repairs Melbourne

Timber door repairs, door-frame work, trimming, adjustment, installation and replacement for Melbourne properties.

Restored aqua entry door with decorative oval glass

A door that sticks, drops, rubs or no longer closes cleanly may need more than a quick adjustment. The cause can sit in the hinges, the timber door, the jamb or the surrounding frame. Mel One assesses the full opening before recommending a repair, trim, refit or replacement.

Our door carpentry work can cover internal and external timber doors, damaged frames and jambs, rotten lower sections, fitting and alignment. Lockouts, key problems and lock mechanisms are locksmith work; we keep that boundary clear and focus on the timber and carpentry components.

If the door works normally and the concern is its weathered surface finish, see our front-door restoration example for a documented preparation, refinishing and rehanging job. Soft or crumbling timber needs timber-rot assessment before a new coating is considered; sticking, rubbing or frame damage stays with this door-repair service.

What to expect

From a rubbing door to a sound opening and suitable finish.

01

Check the leaf, jamb and hardware

We inspect where the door catches, the hinge recesses and screws, latch alignment, lower jamb and door edges. Rain-related swelling, loose hardware and rotten fixing points need different repairs; the whole opening is checked before timber is trimmed.

02

Decide adjustment, timber repair or replacement

A sound leaf and frame may suit hinge adjustment or local repair. A repairable split may need cleaning, a compatible adhesive and controlled clamping before filling; this is not a default remedy for rotten timber, a failed joint or structural damage. We compare section replacement with a new leaf or frame where needed. Lock cylinders, keys and internal mechanisms remain locksmith work.

03

Protect glass and keep the entrance secure

We agree whether the door needs removal and how the entrance will remain secure. Glazing, mouldings, hardware and nearby floors are protected or removed as appropriate, and retained parts are kept for refitting.

04

Restore the fit before the finish

Repairs address the agreed jamb, hinge support or door section before rehanging. A plain internal replacement is checked for size, hinge position, handle and latch compatibility. Any easing or trimming must suit the door construction and manufacturer limits; a glazed door also needs its glass and retained mouldings protected during preparation.

05

Prepare and coat the agreed surfaces

Loose coating is removed and sound edges are feathered where appropriate without sanding away the door profile. Bare timber, repaired areas and exposed edges receive the compatible sealing, primer and paint or clear finish specified for that door; colour matching and full-face refinishing are agreed separately.

06

Rehang and check the opening

We check swing, rubbing, gaps and latch engagement, then compare the agreed faces and edges. The handover identifies the timber and finishing work completed, any separate lock work and the coating conditions that apply before normal use.

Repair pricing

What shapes the quote?

A reliable quote starts with seeing the repair area. These are the factors we normally need to understand first.

  • 01Door type and size
  • 02Frame and jamb condition
  • 03Existing hardware
  • 04Repair, installation or full replacement
  • 05Inside and outside faces, top, bottom and side edges included in preparation and finishing
  • 06Frame and trim work, hardware removal/refitting, rehanging and waste removal: included or separate

See the details

Related carpentry work

Browse all projects

Frequently asked questions

Useful answers before you request a quote.

Can a sticking door be repaired without replacement?

Often it can, but the cause matters. Seasonal movement, loose hinges, swelling and frame movement need different solutions. If several room doors catch after new carpet, list each opening and the floor change so we can discuss them together. Door construction, hinge support, available clearance and the manufacturer’s trimming allowance still need checking individually. A grouped scope may be practical, but parts, finishing and access determine whether a return visit is needed; one visit is not assumed to complete every door.

Do carpenters repair rotten door frames?

A split beside a strike plate or a soft lower jamb may suit a local timber repair or section replacement if the surrounding frame and fixing points remain sound. We assess how far the damage extends, door alignment and continuing moisture before setting that boundary. Deeper decay, a moving frame or damage through a joint can make a larger replacement more practical. Replacing a small visible piece without addressing water entry or weak adjoining timber can leave the cause in place. Lock mechanisms remain locksmith work.

Do you repair locks?

We work on the timber door, jamb and frame. Lockouts, keys and lock mechanisms should be handled by a locksmith.

My timber door catches on the frame. How do you decide between adjustment and replacement?

We check the door leaf, frame, hinges, gaps and surrounding timber to identify whether alignment, hardware or timber damage is causing the contact. A sound door may suit adjustment or local repair; severe distortion, decay or an unsound frame can make replacement more practical. Lockouts, keys and lock mechanisms remain locksmith work.

The door only jams after rain. Should it be planed now, or could that leave a gap when it dries?

Have the hanging, gaps and moisture exposure checked before timber is removed. A door that releases again in dry weather may need a different sequence from a loose hinge or a permanently distorted leaf. Planing a wet edge without dealing with the water path can leave the original cause unresolved and too much clearance when conditions change. Show the catching point, staining, failed coating and the whole opening, and describe any earlier repair. The assessment should distinguish door or frame adjustment, moisture-source work, local timber replacement and refinishing. Any trimming needs to suit the actual door construction and maker’s limits, with exposed edges included in the finishing scope. If this is the main entrance, ask how it will remain secure during removal, drying or coating, and whether a return visit is needed. Confirm those items in the quote instead of assuming a quick trim and repaint covers everything.

Read all carpentry FAQs

Plan the repair and the property access together

For a door enquiry, include the whole opening, the catching or damaged point and any building approval or access restrictions. Inner Melbourne and inner-west repair enquiries →

The team confirms the actual scope, location and visit arrangements before work is booked.

Discuss your project

Need door repairs in Melbourne?

Share the suburb, what you have noticed and a few useful photos. Check our Melbourne service areas, then we will explain what we can assess from the details and what needs an on-site check.