Frames, sills and exterior exposure · Melbourne

Timber Window Repairs Melbourne

Carpentry repairs for damaged or rotten timber window frames and sills, with clear boundaries around glass and finishing work.

Completed exterior timber windows above a residential balcony

Timber windows often show damage first at sills, lower frame corners and exposed exterior joints. Mel One assesses whether a local timber repair is suitable or whether the affected section has deteriorated too far for a durable patch.

The carpentry scope can include damaged timber sections, frame or sill replacement and preparation for sealing or painting. Glass replacement is also available through Mel One Property Maintenance, but glazing, sealing and final painting are confirmed separately so the quote is clear.

What to expect

Repair the timber while preserving the way the window sheds water.

01

Inspect the sill, frame and sash

We inspect lower corners, the sill profile, joints, sash movement and fixing points from the available inside and outside access. Paint failure, pooling, sealant and adjoining flashing are considered together so the source of recurring wetting is not missed.

02

Choose a contained repair or replacement

Sound adjoining timber can support a local sill or frame-section repair. Deterioration through the frame, failed joints or insecure glass support may require a larger replacement. Glazing, sash hardware and carpentry are identified separately in the quote.

03

Protect glass, finishes and weather exposure

Glass and surrounding finishes are protected before removal or preparation. Where a sash or frame section must come out, we agree the opening protection and glazing arrangements first, rather than leaving weather protection to the finishing stage.

04

Fit the timber and retain drainage details

The repair follows the existing section and sound fixing locations. We preserve the intended sill fall, water-shedding edges, glazing clearances and drainage openings; sealant is used only where appropriate to the actual window system, never to block water escape paths.

05

Prepare a compatible protective finish

Unsound paint is removed and suitable edges and bare timber are prepared for the specified primer and topcoat. Timber, repair compound, putty or glazing seal and existing coating need compatible treatment; painting over soft timber is not a window repair.

06

Check operation and visible junctions

We check opening and closing where the window is operable, repaired junctions and the agreed finishing boundary. The handover identifies carpentry, glazing and any separate water-entry investigation or repair.

Repair pricing

What shapes the quote?

A reliable quote starts with seeing the repair area. These are the factors we normally need to understand first.

  • 01Window size and style
  • 02Damage depth
  • 03Interior and exterior access
  • 04Glass, sealing or paint coordination

See the details

Related carpentry work

Browse all projects

Frequently asked questions

Useful answers before you request a quote.

Can a rotten timber window frame be repaired?

A local repair may be possible when the damage is contained and the remaining frame is sound. Deeper deterioration or repeated water entry may require a larger section to be replaced.

Does the whole window need replacing?

Not always. The decision depends on the condition of the frame, sash, sill and joints. We inspect the complete unit before recommending replacement.

Can Mel One also replace broken glass?

Mel One Property Maintenance also handles glass replacement. We confirm the glazing and carpentry parts separately so each item is properly scoped.

Read all carpentry FAQs

Discuss your project

Need timber window repairs in Melbourne?

Share the suburb, what you have noticed and a few useful photos. Check our Melbourne service areas, then we will explain what we can assess from the details and what needs an on-site check.